Researched by Ric Ruben. Prices checked several times a week.
The Elegoo Saturn 4 Ultra 16K is a 10-inch, 16K mono LCD resin printer with auto-leveling, smart tank heating, and an AI monitoring camera. It is currently $649.99 on Elegoo's site. It suits buyers who want sharper detail than a 12K resin printer without paying for a dental-grade machine.
Affiliate disclosure: if you buy through links on this page we may earn a commission at no extra cost to you. We do not own or test the printers on this site. See how we research.
Current price and where to buy
$649.99, checked several times a week on Elegoo's US store. Elegoo runs frequent promotions on it, so check the live price before buying.
Deciding between this and the rest of the field? We line the Saturn up against the Mars 5 Ultra and the Anycubic Photon Mono M7 in our guide to the best resin 3D printer you can buy right now.
See the Saturn 4 Ultra 16K Compare: Photon Mono M7
Two outside reviews back it up. All3DP picked it as its best resin 3D printer under $500, and GamesRadar+ gave it five stars in its review.
Saturn 4 Ultra 16K vs. Saturn 4 Ultra vs. Photon Mono M7
| Spec | Saturn 4 Ultra 16K | Saturn 4 Ultra | Anycubic Photon Mono M7 |
|---|---|---|---|
| Price | $649.99 | $593.99 | $349 |
| LCD | 10-inch, 16K mono | 10-inch, 12K mono | 10.1-inch, 14K mono |
| XY resolution | 14 x 19 micron | 19 x 24 micron | 16.8 x 24.8 micron |
| Build volume | 211.68 x 118.37 x 220 mm | 218.88 x 122.88 x 220 mm | 223 x 126 x 230 mm |
| Max print speed | 150 mm/h | 150 mm/h | 150 mm/h (high-speed resin) |
| Tank heating | Smart heated, 30C | Standard tank | Not listed |
| Camera | AI camera with light | AI camera | Not listed |
Sources: Elegoo Saturn 4 Ultra 16K product page and Anycubic Photon Mono M7 product page, checked several times a week.
Buy this if
- You already print resin and want to go from 12K to 16K detail without leaving Elegoo's ecosystem
- You want auto-leveling and a heated tank so prints are more consistent in a cold garage or workshop
- You want to monitor prints remotely, since the AI camera flags empty plates and warped models
Skip this if
- You have not printed resin before. The step up from FDM (post-curing, ventilation, PPE) matters more than which resin printer you buy first
- You need a bigger build volume than 211.68 x 118.37 x 220 mm. Elegoo's own Jupiter 2 or the Anycubic Photon Mono M7 Max go larger
- You only print standard resin at default settings, where the jump from 12K to 16K is hard to see
What buyers are actually asking
Elegoo's own product page carries a running Q&A thread with over 55 questions as of September 2026. The recurring topics are logistics and compatibility, not print failures:
327.4 x 329.2 x 548 mm (L x W x H) with the lid closed. Elegoo recommends roughly 300 mm of extra clearance above and behind the machine to open the lid fully.
Yes, a tempered glass LCD protector ships pre-installed.
Yes, per Elegoo's support answers on the product page.
Any standard 405nm UV resin. Elegoo's own resin lines are sized for this printer, but they are not required.
Source: buyer questions and Elegoo staff answers on the product page, dated entries checked several times a week.
How big can the Saturn 4 Ultra 16K print?
Up to 211.68 x 118.37 x 220 mm (about 8.3 x 4.7 x 8.7 inches), per Elegoo's spec sheet. That is a 10-inch class resin build area, roomy enough for tall display pieces or a full plate of miniatures in one print. The 12K Saturn 4 Ultra is slightly larger at 218.88 x 122.88 x 220 mm. The machine itself measures 327.4 x 329.2 x 548 mm with the lid closed, so leave about 300 mm of clearance above and behind it.
Related reading
- Our original Elegoo Saturn review, the discontinued printer this model replaces
- Current prices for every printer we track, updated the same day as this page
- Best resin printer for miniatures, if fine detail matters more to you than raw resolution bragging rights